Using the Diversey Smart Dose dispensers is fast and easy and helps ensure that the cleaning solutions are mixed correctly in just the right amounts.

1) Be sure to wear safety goggles when mixing the cleaning solutions.

2) Fill spray bottle or mop bucket with cold water.

3) Turn the yellow dial on the top of the Diversey bottle to the left or right to so the black arrow in the center is pointing to the desired container type. For example, pointing to the spray bottle (for Crew and Glance) or the bucket (for Stride).

4) Pull up yellow dial knob as far as it will go.

5) Place the spout over the spray bottle or mop bucket and push the yellow knob all the way down.

6) Important! Turn yellow dial knob to the “no drip” or off position and wipe the end of spout to prevent messy drips. If you notice that it is dripping anyway, please be sure to place a rag under it to prevent damage to the floors or shelves.

7) Attach trigger sprayer to bottle.

Pro Tips:

A) It is OK if the yellow dial doesn’t pull up very far… some of the products only have it going up a short distance.

B) If it is EXCESSIVELY difficult to pull up or push down, the lever was probably not reset previously.

• Hard to pull up: Squirt the partial dose in the mop sink or the like by depressing the yellow lever all the way down and try again.

• Hard to push down: Pull the lever all the way up until it stops or you will not be able to push down to dispense the liquid.